By optical detecting principle, most all kinds of liquid can be detected quickly.
No adjustment is required for the sensor, then very few risk for setting error Versatile on performance, and low cost on its expense for both of human and material.
Controller & Sensor, Available for many detected points
RS-1000D | RS-1000F | RS-1000P | RS-1000PN | RS-1000FP | RS-1000PP | ||
Supply Voltage | 5 VDC ±5% | ||||||
Power Consumption | 20mA max | ||||||
Indication of LED | Red: Leakage , Green: Normal | ||||||
Ambient Temperature | -10~60 deg C (14~140 deg F) | ||||||
Connection with Control Unit | All Detection Unit must be used with RS-1000C or RS-1000CA Control Unit | ||||||
Material | Case | PVC | PFA | PP | PVC | PFA | PP |
Cable | HT-PVC | FEP | HT-PVC | HT-PVC | FEP | HT-PVC | |
LED LAMP |
Epoxy (Exposed) |
Epoxy (embedded) |
Epoxy (exposed) |
Epoxy (embedded) |
|||
Water Proofing | Silicon Stuffed |
Sealed Silicon Stuffed |
Silicon Stuffed |
Sealed Silicon Stuffed |
|||
Weight | Appx,40g | Appx,50g | Appx,40g | Appx,50g | |||
Absorbent Paper | Required | Not Required | |||||
Selectable Bracket | P/N-6417, P/N-6418, P/N-6419 | P/N-6414 | P/N-6416, P/N-6420B |
NPN Transistor Open collector. Internal Amplifier
• Fail Safe Design - Output current is conducted in normal dry conditions and will turn off in the presence of liquid.
• This liquid leak detector is suitable for the integrated monitoring and also individual monitor.
• This model can operate the load directly with its own output, without the RS-1000C Controller.
RS-1000DA -24V |
RS-1000FA -24V |
RS-1000PA -24V |
RS-1000DAP | RS-1000FAP | RS-1000PAP | ||
Supply Voltage | 5 - 24 VDC ±5% | ||||||
Power Consumption | 20mA max | ||||||
Indication of LED | Red: Leakage , Green: Normal | ||||||
Ambient Temperature | -10~60 deg C (14~140 deg F) | ||||||
Output | NPN Transistor Open Collector 50mA max, 2 opposite signals (Leakage - ON and Normal - ON) |
||||||
Material | Case | PVC | PFA | PP | PVC | PFA | PP |
Cable | HT-PVC | FEP | HT-PVC | HT-PVC | FEP | HT-PVC | |
LED LAMP |
Epoxy (Exposed) |
Epoxy (embedded) |
Epoxy (exposed) |
Epoxy (embedded) |
|||
Water Proofing | Silicon Stuffed |
Sealed Silicon Stuffed |
Silicon Stuffed |
Sealed Silicon Stuffed |
|||
Weight | Appx,40g | Appx,50g | Appx,40g | Appx,50g | |||
Absorbent Paper | Required | Not Required | |||||
Selectable Bracket | P/N-6417, P/N-6418, P/N-6419 | P/N-6416, P/N-6420B |